Bay Networks 58000 Installation And Reference Manual Download Page 67 | Manualshive

Page: 67 / 158

background image

Model 58000 Switch Operation

893-878-B

2-29

Connecting Switch Communities with Feeder Links in the Same
Virtual LAN

Interconnecting different switch communities with feeder links that are in the
same virtual LAN requires careful planning and configuring. When connecting
switch communities with feeder links that are in the same virtual LAN, adhere
to the following guidelines:

•

Use only one “edge” switch per community to make your feeder link
connections. If you use more than one edge switch per community to
make feeder link connections, make sure the master switch in the
community with multiple edge switches has the highest switch priority.
For more information about how master switch priorities are assigned, see

Modifying the Master Switch Priority

in Chapter 6, “Configuring the

Model 58000 Switch.”

•

Use a tree (or star) topology to connect three or more switch communities.

If the master switch in the community with multiple edge switches does not
have the highest switch priority, you may create a data loop between the
interconnected switches. Data loop configurations are not supported because a
broadcast storm (excessive transmission of address resolution requests) or
duplicate frame problems may arise.

shows a supported configuration that uses more than one edge

switch for feeder link connections between communities, with the master
switch in switch community 2 having the highest switch priority. In this
example, switch D is the master switch.

NOTE:

Edge switches are used to interconnect switch communities.

893-878-B Book Page 29 Monday, May 12, 1997 2:06 PM

«
...
65
66
67
68
69
...
»

Summary of Contents for 58000































































































































































Reviews:

No comments

Related manuals for 58000

Brand: E-Lins Pages: 59

Brand: E-Lins Pages: 11

Brand: E-Lins Pages: 9

Brand: E-Lins Pages: 5

Network Video Recorders

Brand: e-Line Technology Pages: 34

grandMA2 Series

Brand: MA lighting Pages: 36

Brand: REXROTH Pages: 68

Brand: Allied Telesis Pages: 1

Brand: Ubiquiti Pages: 20

Brand: AMG Systems Pages: 2

LBON320AC Series

Brand: Lindsay Broadband Pages: 4

Brand: Xantech Pages: 4

E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010

Brand: Juniper Pages: 122

SmartSwitch 8-slot

Brand: Cabletron Systems Pages: 150

UniFi WiFi BaseStation XG

Brand: Ubiquiti Pages: 19

Emotron OSTO 100

Brand: CG Pages: 112

Brand: Comtrend Corporation Pages: 4

Brand: Linksys Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands