Baroness LM551, Service Manual, Page: 69 / 213

Important
Use a pressure gauge and hydraulic hose
which can withstand the pressure of 23.0 MPa
(234.5 kgf/cm
2
) (3335.9 psi) or more.
Prepare an O-ring connector PF1/4-PF1/4.
1
ms5j2m-023
Forward Traveling (4WD)_002
1 O-ring connector PF1/4-PF1/4
Remove the plug from the manifold located
between the left and right front wheels with
a 6 mm hexagon wrench.
1
2
ms5j2m-019
Forward Traveling (4WD)_003
1 Manifold
2 Plug
Install an O-ring connector PF1/4-PF1/4 in
the position where the manifold plug was
removed.
1.
2.
3.
Install the pressure gauge for high pressure
measurements onto the O-ring connector
PF1/4-PF1/4.
Secure the pressure gauge to the main
vehicle with string so that it does not fall.
1
2
ms5j2m-020
Forward Traveling (4WD)_004
1 O-ring connector PF1/4-PF1/4
2
Pressure gauge for high pressure
measurements
Install slings to the left and right pivots of
the rear wheels.
2
3
3 1
ms5j2m-021
Forward Traveling (4WD)_005
1 Rear wheel right pivot
2 Rear wheel left pivot
3 Sling installation position
4.
5.
Hydraulic System
LM551
Hydraulic System
Page 4-31
Measurement