Baroness LM551, Service Manual, Page: 160 / 213

Mower unit #3
A
B
oxie9a-014
Adjustment of Mower Stoppers for Mower Unit #2 and
#3_003
A Mower stopper front position
B Mower stopper rear position
Attach the mower stoppers temporarily.
Start the engine.
Raise all mower units.
Tighten the mower stopper nuts previously
attached in a position where the mower unit
is leveled and the mower stopper contacts
the mower arm.
Note:
The relationship between the mower unit type
and the mower stopper is as follows.
LH62
1
A
B
oxie9a-017
Adjustment of Mower Stoppers for Mower Unit #2 and
#3_004
1 Mower stopper
A Front
B Rear
8.
9.
10.
11.
LH52
・
LS62
A
B
1
oxie9a-010
Adjustment of Mower Stoppers for Mower Unit #2 and
#3_005
1 Mower stopper
A Front
B Rear
LS66
Mower unit #2
After installing the mower stoppers, press
the stopper auxiliary fitting COMP firmly
against the bottom side of the frame and
secure it with the bolts.
A
1
3
B
2
oxie9a-018
Adjustment of Mower Stoppers for Mower Unit #2 and
#3_006
1 Mower stopper
2 Stopper auxiliary fitting COMP
3 Bolt
A Front
B Rear
LM551
Main Vehicle
Page 6-16
Adjustment