Baroness LM551, Service Manual, Page: 151 / 213

Tighten the nut.
1
3
4
2
unp7tf-004
Adjustment of Pedal Stopper_002
1 Traveling pedal
2 Work speed lock lever
3 Nut
4 Stopper bolt
A
6apbg6-001
Adjustment of Pedal Stopper_003
A 31.0 mm (1.22 in)
11.
Adjustment of Throttle Wire
The movement of the lever may become
sluggish, the play of the inner wire may change
due to the R angle of the outer wire, and the
inner wire may be stretched due to
deterioration of parts.
Inspect it and, if necessary, make adjustments.
Warning
Before starting the engine, verify that no one
is around the machine and that the area is
free of obstacles.
Caution
Make sure not to touch any hot areas or
rotating parts.
Remove the control arm cover and arm
bracket cover of the operation panel.
Open the hood.
Move the throttle lever on the operation
panel against the low speed stopper.
Use the throttle lever nut and adjust it so that
the length of the threaded section is the
same at the top and bottom.
1
2
3
5
4
6v3fj3-028
Adjustment of Throttle Wire_001
1 Operation panel
2 Throttle lever
3 Low speed stopper
4 Nut
5 Threaded section
1.
2.
3.
4.
Main Vehicle
LM551
Main Vehicle
Page 6-7
Adjustment