Baroness LM551, Service Manual, Page: 33 / 213

1
2
rwyt62-109
Jack-Up Points_005
1 Pivot
2 Block of wood
Left pivot
rwyt62-108
Jack-Up Points_006
When jacking up the machine at the left
pivot, place a block of wood between the left
pivot and the frame.
Note:
Use a block of wood with a height of
approximately 130 mm (5.12 in).
1
2
rwyt62-107
Jack-Up Points_007
1 Pivot
2 Block of wood
4.
Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
Greasing Points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
9
4
2
8
1
1
2
3
5
2
8 1
4
6
7
8bq62b-358
Greasing Points_001
Maintenance Standards and Maintenance
LM551
Maintenance Standards and Maintenance
Page 3-19
Greasing