Barco PULSAR BG, User Manual

Page: 29 / 126

P
ULSAR
Operation
Page 5-7
5.3.4 Alarms And Errors
If the
STATUS
key is blinking red, there are alarms or errors that are not acknowledged yet. If you press
the
STATUS
key, the
VIEW ALARMS
menu appears. If an alarm condition is over, that alarm is removed
from the list.
P
ULSAR
Alarm List
RF OUTPUT OFF
CONV PLL UNLOCK
IF PLL UNLOCK
VIDEO LOSS
WHITE LIMITING
AUX INPUT SELECTED
FORCED AUX INP SELECTED
FORCED PRESET SELECTED
NO REFERENCE CARRIER
NO CHANNEL FILTER
NO INFO ON DATA LINE 16
If an error occurs, the error number is shown in the
VIEW ERRORCODES
menu, together with the number
indicating how many times the error occurred. Errors are not automatically removed from the list.
If the error list is not empty, you can clear the errors by executing
CLEAR ERRORLIST
. Do not clear the
error list too often. If any problem or malfunction occurs, the errors in this list can help to locate the
problem.
P
ULSAR
Error List
ERROR 1-25
Software error
ERROR 26
RAM memory or EEPROM failure (hardware)
ERROR 27-39
Software error
ERROR 40-62
I²C failure, internal communication error, causes malfunctions
ERROR 63-78
Not used, reserved for future applications
ERROR 79-85
Memory error (software), causes malfunctions
ERROR 86
Calibration error (memory, no calibration), causes malfunctions
ERROR 87
Memory error (software), causes malfunctions
ERROR 88-89
Calibration error (memory, no calibration), causes malfunctions
ERROR 90
Memory error (software), causes malfunctions
ERROR 91
Calibration error (memory, no calibration), causes malfunctions
ERROR 92
Memory error (software), causes malfunctions
ERROR 93-97
Not used, reserved for future applications
ERROR 98
Error list full
ERROR 99
Unknown error