Barco PULSAR BG, User Manual

Page: 15 / 126

P
ULSAR
BG Installation
Page 4-3
VIS
IF
OUT IN
4.3 INPUT & OUTPUT CONNECTORS
MAIN VIDEO
Baseband video signal input for the main program.
BNC type connector
(Loop through in option)
VIS IF (Optional)
Vision IF loop input & output. This IF loop can be used in
combination with IF loop scramblers.
F type connectors
SND IF (Optional)
Sound IF loop input & output. This IF loop can be used in
combination with IF loop scramblers.
F type connectors
COMP IF
Composite IF loop input & output. The composite IF signal can
be used in combination with scramblers and Nicam encoders.
BNC type connectors (F type optional)
RF OUT
Connector with the RF output signal.
BNC type connector (F type optional)
AUX VIDEO (Optional)
Baseband video signal input for the auxiliary program. This
input is always a loop through, so you can connect one signal
to more than one P
ULSAR
.
BNC type connector
AUDIO SUBC (Optional)
Audio subcarrier input for the main program as well as for the
auxiliary input. The subcarrier input can be used to insert a
Nicam signal.
BNC type connector
REF IN (Optional)
The reference input is used if either the option external refer-
ence input or vision carrier reference input has been installed.
The reference signal is connected to this input.
BNC type connector
COMP
IF
OUT IN
SND
IF
OUT IN
MAIN
VIDEO
RF
OUT
AUX
VIDEO
AUDIO
SUBC
MAIN AUX
REF
IN