Barco PULSAR BG, User Manual

Page: 16 / 126

Installation P
ULSAR
BG
Page 4-4
IF CW OUT (Optional)
When the P
ULSAR
is equipped with the reference carrier output
option or vision reference carrier output the signal will be
available on this connector
BNC type connector
AUX IF IN (Optional)
When the option composite IF auxiliary input is installed this is the
input connector for the IF signal.
BNC type connector
REF VID IN (Optional)
The reference input is used when the option main scrambled
aux unscrambled is installed in combination with a two carrier
stereo system. This input provides than the stereo coder with
clear / unscrambled video.
BNC type connector
IFs2 OUT (Optional)
When the option separate sound and vision IF output is in-
stalled in combination with a two carrier stereo system this
output connector provides the second sound carrier.
BNC type connector
VIDEO OUT (Optional)
The video output connector is used when the option audio /
video auxiliary input with additional video output for monitoring
is installed. The connector provides the video (after input
selector) at the output for monitoring purposes.
BNC type connector
RF TEST (On the front)
-20 dB test point on the RF output signal.
BNC type connector
IF CW
OUT
IN
AUX
IF
RF TEST
-20 DB
VID
OUT
IF
S2
OUT
REF
VID
IN