6. Installation of Projection System
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________6-7
Figure 6-8
Projection unit installed
Pos
Description
A
Position of guide pins
B
Position of securing screws
C
Protective cover
Table 7
Tighten the securing screws [B].
Make sure that the screws fit tightly! Especially the mid screw of the upper row!
A tight fitting is mandatory for a stable adjustment!
Remove the protective cover [C] and install the cooling hose.
Figure 6-9
Cooling hose installed