Hitachi CP-WX3030WN Operating Manual Download | Manualshive

Page: 1 / 118

background image

1

Projector

User's Manual (detailed)
Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read

Safety Guide

ﬁrst. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are
described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.

Please refer to the pages written following this symbol.

• Mac

®

is a registered trademark of Apple Inc.

• Windows

®

, DirectDraw

®

and Direct3D

®

are registered trademarks of Microsoft Corporation

in the U.S. and/or other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.
• HDMI, the HDMI logo, and High-Deﬁnition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Blu-ray Disc

TM

and Blu-ray

TM

are trademarks of Blu-ray Disc

Association.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

CP-X2530WN/CP-X3030WN
CP-WX3030WN

1
2
3
...
»

Summary of Contents for CP-WX3030WN























































































































Reviews:

No comments

Related manuals for CP-WX3030WN

Brand: Barco Pages: 108

Brand: Barco Pages: 6

Brand: Barco Pages: 143

Brand: Barco Pages: 154

Brand: Barco Pages: 193

Brand: Barco Pages: 85

Brand: Barco Pages: 6

Brand: Samsung Pages: 89

Brand: Samsung Pages: 57

Brand: Nectre Fireplaces Pages: 232

Brand: Yaber Pages: 101

Brand: M-system Pages: 8

TECHNO LIGHT 270

Brand: Storz Pages: 42

Brand: Uniden Pages: 36

Brand: HQ Power Pages: 12

LED PAR 64 COB 250W 5xWHITE Mk2

Brand: Flash professional Pages: 11

ezCinema Plus Series

Brand: Elite Screens Pages: 8

Brand: Panasonic Pages: 151

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands