8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________8-7
8.5.1
Projector Address
Projectors leaving production are all set to a projector address "
255
". When installed in a Display Wall, ever y
pr ojector has to get a unique addr ess via it can be contr olled. This addr ess can be set between 0 and 9 (IR
Remote-Control) or between 0 and 255 (RS232 Remote-Control).
CAST
as well as the
RS232 command
interface
and the
IR Remote-Control Unit
will talk to a specific projector by means of this address.
By means of the
common RC5 address
the IR Remote-Control can talk simultaneously to all projectors of a
Display Wall.
The common RC5 address can be set either to 0 or to 1.
Please note that CAST (Color Adjustment Service Tools) requires that the projector
addresses are assigned as indicated in the picture below.
It is highly recommended to follow this instruction in case for the future use of CAST!
Figure 8-10
projector addresses as required by CAST,
Display Wall seen from front, A: top row
To modify the projector address:
•
Move the cursor to
Projector Address.
•
Press
Enter
to select.
