5. Wall fixation
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________5-4
The following pictures show a sketch of the installed wall fixation on the display wall:
Figure 5-6
wall fixation, A-shape
Item no.
quantities
Description
1
2
Profile (length: project specific)
6
2
Screw M10x110
5
1
Fixation bracket display wall side
2
4
Washer U-6-125
12
4
Screw M6x40
4
1
Distance bushing
7
2
Nut M10
8
2
Washer U-10-125
To install the wall fixation at the display wall, proceed as follows:
•
Take the fixation bracket [5] and attach it to the profiles of the dark box (linear setup!!) using the screws
M6x40 [12] and the washers U-6-125 [2] (4 screws). In case of a curved setup, the center of the bracket is
fixed to the polygonal connection bracket with 2 screws.
•
Position the profiles [1] and apply the bushings [4] (either on top of the profiles as shown in the drawing, or
beneath the profiles).
•
Insert the screws M10 [6].
•
Use the washers [8] and nuts [7] to fix it.