8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
________________________________________________________
________________________
________________________
________________________8-22
0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9
1
1400
1600
1800
2000
2200
2400
2600
2800
3000
dimmer position [ steps ]
n
o
rmal
iz
ed
D
IS
val
u
e
Figure 8-29
intensity of emitted light depends on the position of the dimmer wheel
Only dimmer positions between (approx.) 1600 (minimum brightness) and (approx.)
2600 (maximum brightness) can be addressed.
The dimmer wheel can be enabled or disabled by means of the menu
Service | Color/Brightnes |Optical Dimmer.
If
Optical Dimmer
is selected, a dialog box pops up where the current status is indicated and where this status
can be changed:
Figure 8-30
Dialog Box to enable/disable the optical dimmer
The correct setting is Enabled!
Disabled should only be selected in case the dimmer is defective (stuck)!
