6. Installation of Projection System
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________6-4
Figure 6-5
Overview illumination unit
Pos Description
Pos
Description
A
Main Power
1
Connectors
B
Rocker switch On/Res. with LED
2
Optical interface
C
Rocker switch active Lamp
3
Cooling air outlet
D
LEDs (L1, L2, Fan)
4
Cover lamp top (lamp 1)
E
LED lamp door
5
Cover lamp bottom (lamp 2)
F
Position of guide pins
G
Position of securing screws
Table 5
Due to the keyholes, the securing screws might already be pre-installed.
Loosen the securing screws (see Figure 6-2) slightly and move them about 5 mm downwards
Tighten the securing screws.