Hitachi CP-X8150 User Manual Download

Page: 1 / 115

Projector

CP-X8150/CP-WX8240

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read

Safety Guide

first. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.



• Mac

is a registered trademark of Apple Inc.

• Windows

, DirectDraw

and Direct3D

are registered trademarks of Microsoft Corporation

in the U.S. and/or other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

• HDMI

, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Trademark PJLink is a trademark applied for trademark rights

in Japan, the United States of America and other countries and

areas.

• Blu-ray Disc

and Blu-ray

are trademarks of Blu-ray Disc Association.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

Summary of Contents for CP-X8150




















































































































Search results

Summary of Contents for CP-X8150

Reviews:

Related manuals for CP-X8150

Brands by name

Popular brands

Hitachi CP-X8150, User Manual

Search results

Summary of Contents for CP-X8150

Reviews:

Related manuals for CP-X8150

Brands by name

Popular brands