3. Installation of Screen Module
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________3-6
static
10 screws
8 screws 8 screws
8 screws
2 screws
2 screws
0 screws 0 screws
0 screws
0 screws
0 screws
0 screws
All screens are delivered with full movability,
i.e. no screws attached.
The number of screws to be applied and fixed
depends on the position of the screen in the
display wall.
Depending on the position of the screen in the
display wall, zer o, 8 (4x2), 2 (2x1) or
10 (4x2 + 2x1) screws have to be installed.
Step1
Please note:
Installation of the screens starts on the
bottom
row.
Every darkbox provides the fixation facilities for
the screen. The fixation facilities comprise 4
screw connectors (one at each corner), and in
addition next to the top screw connectors a
guide pin to put on the screeen.
The fixation facilities and their use are the
same for the screen modules and the seamless
screens.
Step2
Start installing the static screen:
The static screen is the screen in the mid of the
bottom row.
In case of an even number of colums (no
"center module") the static screen is the first
scr een of the r ight half of the display wall,
seen from front.
For the static screen, apply and fix all 10
screws: both, movability in vertical and in
horizontal direction has to be locked!