10. Manual User Interface
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
________________________________________________________
________________________
________________________
________________________10-4
10.1.4
Indication of Power LED
Color
Blink Mode
Meaning
Red
Static
Projector is in Standby-Mode (=Off)
Green
Static
Projector is in Operation-Mode (=On)
Yellow
Blinking/Fast
Projector is starting up
Yellow
Blinking/Slowly
Projector is switching off
Green
Blinking/Slowly
Projector is in Operation-Mode (=On);
a Non Critical Error occurred;
Check status for more information;
then press Standby Switch/On for acknowledge
Red
Blinking/Fast
Projector off (Standby) because of a Critical Error;
Service required;
after service press Standby Switch/On for acknowledge
Green
Blinking/Fast
Projector is in Operation-Mode (=On);
a Critical Error occurred;
Check status for more information.
10.1.5
Indication of Lamp Door LED
Color
Blink Mode
Meaning
Red
Static
lamp is switched off,
lamp door can be opened for servicing
Green
Static
lamp is switched on,
DON’T open the lamp door!
(in case the door is opened, the lamp is switched off automatically)
Yellow
Static
lamp is switched on for Hot Standby mode or Auto Switch mode (17
minutes changeover time),
DON’T open the lamp door!
(in case the door is opened, an error occurs)
Only open the lamp door in case the lamp door LED shines red.
