2. Set up of OverView mD
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________2-3
•
Screw the supporting frames together (size 10 socket spanner and size 5 hex key).
•
Be sure that the 2 frames are exactly adjusted (check area).
Frame 1
Frame 2
Check area
Check area
O.K.
Figure 2-2
position of securing screws and check area
In order to assemble a polygonal arrangement, proceed as follows:
•
Concerning the feet adjustment of the supporting frames proceed as mentioned above.
•
Screw the supporting frames together using the polygonal kit (see Figure 2-3). Don’t tighten the securing
screws.
Figure 2-3
polygonal installation front view