6. Installation of Projection System
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
_________________________________________________________
_________________________
_________________________
_________________________6-2
6.1
Installation of Illumination Unit
Remove the left top [1], center [4]and the right rear cover [5]. (see Figure 6-1)
Figure 6-2
Rear view dark box
with removed rear covers
Pos
Description
A
Projection mirror
B
Guide pins for predefined projector position
C
Position of projector securing screws
D
Cooling hose illumination unit
E
Cooling hose projector
F
Guide pins for predefined illumination unit position
Table 4
Unpack the illumination unit. Connect the cooling hose [D] at the illumination unit. Install the illumination unit
into the dark box. The position of the illumination unit at the dark box is predefined by 2 guide pins (see Figure
6-2). The illumination unit is fixed with 4 securing screws.