Hitachi CP-X2 - XGA LCD Projector User Manual Download

Page: 1 / 78

Projector

CPX2/CPX6

User’s Manual – Network Functions

This manual is only intended to explain Network Functions.

►Before using this product, read the “User’s Manual – Safety

Guide” and related manuals to ensure proper use of this product. After reading

them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

• Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

CAR

Summary of Contents for CP-X2 - XGA LCD Projector















































































Search results

Summary of Contents for CP-X2 - XGA LCD Projector

Reviews:

Related manuals for CP-X2 - XGA LCD Projector

Brands by name

Popular brands

Hitachi CP-X2 - XGA LCD Projector, User Manual

Search results

Summary of Contents for CP-X2 - XGA LCD Projector

Reviews:

Related manuals for CP-X2 - XGA LCD Projector

Brands by name

Popular brands