Barco Led Pro, User Manual

Page: 73 / 186

LED-PRO • User’s Guide 59
4. Operation
Using the Setup Wizard
8. From the Set Wall Dimensions Menu , the Wall Data Connection Menu
appears.
Figure 4-36. Wall Data Connection Menu
~
Select Horizontally if cables are connected horizontally.
~
Select Vertically if cables are connected vertically.
~
Select Previous to return to the previous menu in the wizard.
9. After selecting the correct data cable connection, the Tile Connection Menu
appears.
Figure 4-37. Tile Connection Menu (sample)
Highlight the correct connection point, and press SEL . Please note:
~
In a standard tile array, choices are Bottom Right , Bottom Left , Top
Right , and Top Left .
~
In a horizontal tile array that is one tile in height, choices are Left or
Right .
~
If a vertical tile array that is one tile wide, choices are Top or Bottom .
10. Select Next to display the Rolling Grid Test Menu . During this interval, the
system configures the wall, and displays a test pattern with diagonal motion.
> H o w d o t h e w a l l d a t a
c a b l e s c o n n e c t ?
H o r i z o n t a l l y
V e r t i c a l l y
P r e v i o u s
> L o o k i n g a t t h e w a l l
f r o m t h e f r o n t , t h e
f i r s t t i l e c o n n e c t e d
t o t h e L E D - P R O i s
t h e :
B o t t o m R i g h t
N e x t
P r e v i o u s