Barco Led Pro, User Manual

Page: 106 / 186

92 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
„
To unlock the panel via the command line interface:
1. Use the LOCKOUT command. In Appendix B, refer to the “ LOCKOUT ” section
on page 156 for details.
p~îÉ=póëíÉã=pí~íÉ
On the System Menu , scroll to the Save System State function and press SEL to save all
system parameters in non-volatile memory. The message “ Saving System State ” is
shown. If you do not save changes, information will not be restored at the next power up.
råë~îÉÇ=`Ü~åÖÉë
If you change any parameter within the System Menu , but you do not save the changes
(using the Save System State function), the “ Save System Configuration ” message will
be shown when you attempt to exit the menu:
Figure 4-75. Save System Configuration Message
~
Press SEL to save the changes.
~
Press ESC to continue operations without saving changes.
pçÑíï~êÉ=sÉêëáçå
From the Expert Mode Menu , select Software Version to display the Software Version
Menu , which displays the system’s installed version of code.
Figure 4-76. Software Version Menu
c~Åíçêó=oÉëÉí
From the Expert Mode Menu , select Factory Reset to display the Factory Reset Menu ,
which enables you to reset LED-PRO to its "factory default" condition. Refer to the
“
Factory Reset ” section on page 52 for instructions.
Note This function is identical to the Save System State function
located in the Setup Menu .
S a v e S y s t e m C f g ?
< S E L > = Y e s
< E S C > = N o
S O F T W A R E V E R S I O N
V e r s i o n 2 . 0 0
Note This function is identical to the Factory Reset function
located in the Setup Menu .