Barco Led Pro, User Manual

Page: 69 / 186

LED-PRO • User’s Guide 55
4. Operation
Using the Setup Menu
If this error message persists and there is no DVI source or display device
connected to LED-PRO, please contact Barco customer service. In Appendix C,
refer to the “
Contact Information ” section on page 162 for details.
6. If programming is successful, the following message is shown:
Figure 4-30. EDID Programming Successful Message
Press ESC to return to the EDID DVI In Format Menu .
7. Reconnect the DVI cable from your computer to LED-PRO.
8. Reboot the computer in order for the new EDID information to be read, and for the
new preferred resolution to become available.
E D I D P r o g D o n e
C o n n e c t D V I i n p u t
a n d r e b o o t t h e P C
< E S C > = C o n t i n u e