Barco Led Pro, User Manual

Page: 45 / 186

LED-PRO • User’s Guide 31
4. Operation
Using the Menu System
rëáåÖ=íÜÉ=jÉåì=póëíÉã
This section lists the rules and conventions for using LED-PRO’s menu system. The figure
below illustrates a sample menu:
Figure 4-9. Test Pattern Menu (sample)
Please note the following important rules and conventions:
•
Pressing any of the buttons in the Menu Keys Section takes you directly to the
top level of the selected menu.
•
The top line names the current menu, in all capital letters.
•
Subsequent lines typically display two fields:
~
For a listed function , the left-hand field names the function and the right-
hand field is the function’s current parameter or value.
~
For a listed sub-menu , the left-hand field names the sub-menu that you
can access, and the right-hand field displays the double arrow ( >> ),
indicating that a sub-menu is available.
•
The “navigation” cursor ( > ) in the left-hand column indicates the current line on
which action can be taken. This arrow “scrolls” as you rotate the knob.
•
Scrolling:
~
Turn the ADJUST knob counter-clockwise ( CCW ) to scroll down.
~
Turn the ADJUST knob clockwise ( CW ) to scroll up.
•
To enter a sub-menu, scroll to the desired line and press
SEL
.
•
To change a parameter, scroll to the desired line and press
SEL
. The cursor
changes to the “edit” cursor (
#
). Use the ADJUST knob to modify the parameter.
•
To accept a parameter or value, press
SEL
. The edit cursor changes back to the
navigation cursor.
•
In the “edit” mode, to exit (or cancel) without changing the original parameter,
press
ESC
.
T E S T P A T T E R N
T y p e B u r s t
> R a s t e r B o x O f f
D i a g o n a l M o t i o n O f f
Note Throughout this chapter, the term “ select ” is used as an
abbreviation for “scroll to a selected menu line and press the
SEL button.”
S
Select the Raster Box field to ...
Note You must press SEL to activate an LED wall function.
Processor functions generally update as you adjust them.