Barco Led Pro, User Manual

Page: 116 / 186

102 LED-PRO • User’s Guide
4. Operation
Using the LED Menu
cáÄÉê=qñ=fa
The Fiber Tx field lists the ID of the Fiberlink Transmitter .
cáÄÉê=oñ=fa
The Fiber Rx field lists the ID of the Fiberlink Receiver .
iba=qÉëí=m~ííÉêå
From the LED Menu , select LED Test Pattern to display the Wall Test Pattern Menu .
This menu allows you to control test patterns that are programmed into the LED tiles
themselves.
Figure 4-84. Wall Test Pattern Menu (sample)
Following are descriptions of each menu function.
•
Source
•
Type
pçìêÅÉ
The Source field enables you to set the LED test pattern mode. If status is n/a , ensure that
LED Control is set to Local :
•
Internal — test patterns are controlled from within the tiles.
•
External — LED-PRO controls the tiles.
qóéÉ
The Type field controls the type of LED test pattern, such as “Cycle” and individual full
screen colors.
iba=lpa
From the LED Menu , select LED OSD to display the Wall OSD Menu , which enables you
to control various on-screen LED displays. Note that the available displays vary between
Barco LED tiles.
Figure 4-85. Wall OSD Menu (sample)
W A L L T E S T P A T T E R N
> S o u r c e
I n t e r n a l
T y p e C y c l e
W A L L O S D
> S t a t u s
O n
L o o p