Barco Led Pro, User Manual

Page: 160 / 186

146 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
type [1-2], V Lock | HV Lock
•
Query :
LCKMODE?
Returns the Lock To Source Mode and Type in the format
= mode type
S
LCKMODE 1 2 (Enable Lock To Source and set Type to HV Lock)
S
LCKMODE? (Queries Lock To Source Mode and Type)
i`hme^pb==Ü=
•
Description : Sets Lock To Source Horizontal Phase
•
Parameters : h - H Phase [ (-Input H Total/2) - (+Input H Total/2) ]
•
Query :
LCKPHASE?
Returns the Lock To Source Horizontal Phase in the format
= h
S
LCKPHASE 150 (Set Lock To Source H Phase to 150)
S
LCKPHASE? (Queries Lock To Source H Phase)
l`kq=ååå
•
Description : Adjust LED Wall Output Contrast.
•
Parameters : nnn - Output Contrast (0% - 100%)
•
Query :
OCNT?
Returns the Output Contrast in the format
= nnn
S
OCNT 50 (Adjusts Output Contrast to 50%)
S
OCNT? (Queries Output Contrast)
l`opq
•
Description : Reset Output Configuration.
•
Parameters : None
S
OCRST (Reset Output Configuration)
l`p^s
•
Description : Save Output Configuration to non-volatile memory.
•
Parameters : None
S
OCSAV (Save Output Configuration)
Note Command is only applicable when LED Wall Ctrl = Local.