Baldor ID15J1F50-ER, Installation And Operating Manual

Page: 72 / 89

MN715J Specifications and Product Data 6-3
Analog Inputs:
(2 Inputs)
Potentiometer Input 0 - 10VDC
Differential Input Full Scale
Range
0-5VDC, 0-10VDC, 4-20mA, 0-20mA
Differential Input Common
Mode Rejection
40db
Input Impedance 20k
W
Analog Output:
(1 Output)
Analog Outputs 1 Assignable
Full Scale Range 0-5 VDC, 0-10 VDC, 4-20mA, 0-20mA
Resolution 8 bits
Output Conditions 10 conditions plus calibration (see parameter table)
Digital Inputs:
(7 Inputs)
Digital Inputs 7 Assignable
Input Impedance 6.8k
W
(Closed contacts standard)
Leakage Current 10
m
A Maximum
Digital Outputs:
(1 Output)
Relay Output (N.O. and N.C.) 1 Assignable
Rated Voltage
230VAC
Maximum Current 5A Maximum (non-inductive)
Output Conditions 11 Conditions (see parameter table)
Fault Indications:
INVALID BASE ID
NEW BASE ID
1 MIN OVERLOAD
2 SEC OVERLOAD
CURRENT TIMEOUT
PRECHARGE FLT
HW GROUND FAULT
HW SURGE CURRENT
HARDWARE PROTECT
BUS OVERVOLTAGE
BUS UNDERVOLTAGE
HEAT SINK TEMP
EXTERNAL TRIP
REGEN RES POWER
SOFTWARE VER FLT
FE EEPROM ERROR
Note: All specifications are subject to change without notice.