Baldor ID15J1F50-ER, Installation And Operating Manual

Page: 47 / 89

4-10 Programming and Operation MN715J
Reset Parameters to Factory Settings
Sometimes it is necessary to restore the parameter values to the factory
settings (after new software is installed, etc.). This procedure describes how
to restore factory settings.
Note: All parameter values already programmed will be changed when resetting the
control to factory settings.
Action Description Display
Apply Power If no faults and programmed for
LOCAL operation.
Press PROG key Enter program mode.
Press
Y
or
B
key
Scroll to Level 2 Blocks.
Press ENTER key Select Level 2 Blocks.
Press Y or B key Scroll to the Miscellaneous block.
Press ENTER key Select Miscellaneous block.
Press ENTER key Access Factory Settings
parameter.
Press Y key Scroll to YES, to choose original
factory settings.
Press ENTER key Restores factory settings.
Press RESET key Return to Miscellaneous block.
Press Y key Scroll to menu exit.