Baldor ID15J1F50-ER, Installation And Operating Manual

Page: 71 / 89

6-2 Specifications and Product Data MN715J
Keypad Display:
Display Backlit LCD Alphanumeric
2 Lines x 16 Characters
Keys Membrane keypad with tactile response
Functions Output status monitoring
Digital speed control
Parameter setting and display
Fault log display
Motor run and jog
Local/Remote
LED Indicators Forward run command
Reverse run command
Stop command
Jog active
Optional Remote Mount
Keypad
100 feet Maximum from control
Control Specifications:
Control Method Sine wave carrier input, PWM output
Frequency Accuracy 0.01Hz Digital
0.05 % Analog
Frequency Resolution 0.01Hz Digital
0.5% Analog
Carrier Frequency 2.5, 5.0 and 7.5kHz
Transistor Type IGBT (Insulated Gate Bipolar Transistor)
Transistor Rise Time 2500 V/ m sec. (dv/dt)
Torque Boost Automatic adjustment to load (Standard)
0 to 15% of input voltage (Manual)
Volts/Hertz Pattern Linear, Squared Reduced, Three Point
Accel/Decel Time 0 to 600 sec. for 2 assignable plus JOG
S-Curve Time 0 to 100%
Base Frequency 10 to 120Hz
Regenerative Braking Torque 50% with optional external braking resistor (–ER)
Jog Frequency
0 to Maximum frequency
Skip Frequency 0 to Maximum frequency in 3 zones.
Minimum Output Frequency 0 to 150Hz
Maximum Output Frequency 0 to 150Hz
Auto Restart Manual or Automatic
Slip Compensation 0 to 6Hz
Operating modes Keypad
Standard Run
7 Speed
Fan Pump 2Wire
Fan Pump 3Wire
Process Control
3SPD ANA 2WIRE
3SPD ANA 3WIRE
EPOT – 2WIRE
EPOT – 3WIRE