Baldor ID15J1F50-ER, Installation And Operating Manual

Page: 81 / 89

B-2 Parameter Values MN715J
Parameter Values Level 1 Continued
INPUT Block
Parameter Adjustable Range Factory
Setting
User
Setting
OPERATING MODE Keypad
Standard Run
7 Speed
Fan Pump 2Wire
Fan Pump 3Wire
Process Control
3SPD ANA 2WIRE
3SPD ANA 3WIRE
EPOT 2WIRE
EPOT 3 WIRE
Keypad
ANA CMD SELECT Potentiometer
0-10 Volts
0-5 Volts
4 TO 20 mA
0 TO 20 mA
None
Potentio-
meter
ANA CMD INVERSE OFF, ON OFF
ANA CMD OFFSET -20.0 to +20.0% 0.0%
ANA CMD GAIN 80.0% to 120% 100.0%
ANA CMD FILTER 0-6 1
OUTPUT Block
Parameter Adjustable Range Factory
Setting
User
Setting
RELAY OUTPUT Ready
Zero Speed
At Speed Band
At Set Speed
Overload
Underload
Keypad Control
Fault
Drive On
Reverse
Process Error
Ready
ZERO SPD SET PT 0-Max Output Freq 6.00Hz
AT SPEED BAND 0-20.00Hz 20.00Hz
SET SPEED POINT 0-Max Output Freq 60.00Hz
OVERLOAD SET PT 0-PK Current Limit Factory Set
UNDERLOAD SET PT 0-PK Current Limit Factory Set
ANALOG OUT TYPE 0-10 VOLTS, 0-5 VOLTS,
4TO20mA, 0TO20mA
0-10 VOLTS