Baldor ID15J1F50-ER, Installation And Operating Manual

Page: 8 / 89

Section 2
General Information
MN715J General Information 2-1
CE Compliance
A custom unit may be required, contact Baldor. Compliance to Directive
89/336/EEC is the responsibility of the system integrator. A control, motor and
all system components must have proper shielding grounding and filtering as
described in MN1383. Please refer to MN1383 for installation techniques for
CE compliance.
Overview
The Baldor Series 15J control is a PWM inverter motor control. The control
operates by converting AC line power into fixed DC power. The DC power is
then pulse width modulated into synthesized three-phase AC line voltage for
the motor. In this way, the control converts the fixed input frequency to
variable output frequency to cause the motor to have variable speed
operation.
The rated horsepower of the control is based on a NEMA design B four pole
motor and 60Hz operation at nominal rated input voltage. If any other type of
motor is used, or input voltage other than 230 or 460 VAC is applied to the
input terminals, the control should be sized to the motor using the rated output
current of the control.
The Baldor Series 15J control may be used in many different applications. It
can be programmed to operate in a number of operating modes, PWM rates
and output current levels for custom operation.
It is the responsibility of the user to determine the optimum operating mode for
the application. These choices are programmed using the keypad as
explained in the programming section of this manual.
Limited Warranty
For a period of two (2) years from the date of original purchase, BALDOR will repair or replace
without charge controls and accessories which our examination proves to be defective in
material or workmanship. This warranty is valid if the unit has not been tampered with by
unauthorized persons, misused, abused, or improperly installed and has been used in
accordance with the instructions and/or ratings supplied. This warranty is in lieu of any other
warranty or guarantee expressed or implied. BALDOR shall not be held responsible for any
expense (including installation and removal), inconvenience, or consequential damage,
including injury to any person or property caused by items of our manufacture or sale. (Some
states do not allow exclusion or limitation of incidental or consequential damages, so the above
exclusion may not apply.) In any event, BALDOR’s total liability, under all circumstances, shall
not exceed the full purchase price of the control. Claims for purchase price refunds, repairs, or
replacements must be referred to BALDOR with all pertinent data as to the defect, the date
purchased, the task performed by the control, and the problem encountered. No liability is
assumed for expendable items such as fuses.
Goods may be returned only with written notification including a BALDOR Return Authorization
Number and any return shipments must be prepaid.