Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 37 / 174

AquaTrans™ AT600 User’s manual 27
Chapter 4. Initial setup and programming
Chapter 4. Initial setup and programming
4.1 Introduction
This chapter provides instructions for programming the AT600 flow meter to place it into service. Before the AT600
can begin taking measurements, at least the following menus must be programmed:
• “User preferences” on page 37
• “Inputs/outputs” on page 41
• “Sensor setup” on page 56
Refer to the main menu map in figure 30 below, and proceed to the appropriate section for instructions.
Figure 30: Main menu map