Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 70 / 174

Chapter 4. Initial setup and programming
60 AquaTrans™ AT600 User’s manual
Table 3: Pre-programmed pipe materials
Note:
The units shown are the units selected in the units setting menu.
Name Pipe material
CARBON STEEL Carbon steel
SS STEEL Stainless steel
DUCT IRON Duct Iron
CAST IRON Cast Iron
Cu Cuprum
Al Aluminum
BRASS Brass
30%Ni 30% nickel copper alloy
10%Ni 10% nickel copper alloy
PYREX GLASS Pyrex glass
FLINT GLASS Flint glass
CROWN GLASS Crown glass
NYLON PLSTC Nylon plastic
POLYE PLSTC Polyethylene
POLYP PLSTC Polypropylene
PVC PLSTC Polyvinyl chloride
ACRYL PLSTC Acrylic plastic
Select the appropriate pipe material from
the list, and press [x] to return to the previous
screen. If your pipe material is not listed,
select other and press [√] twice. A screen
similar to the following opens.
Press [√] again, and a screen similar to the
following opens.
Use the [

] or [

] key to select a specific
digit, then use the [

] or [

] key to change
that digit as required. After all digits are
correct, press [√] to save. Then, press [x] to
return to the previous screen.