Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 118 / 174

Chapter 6. Communication
108 AquaTrans™ AT600 User’s manual
Command 187 (0xBB): Write alarm configuration
This command is to write the alarm configuration.
Table 89: Request data bytes for write alarm configuration
Table 90: Response data bytes for write alarm configurations
2 Error Invalid selection
3 - 4 Undefined
5 Error Too few data bytes received
6 Error Device-specific command error
7 Error In write protect mode
8 - 15 Undefined
16 Error Access restricted
8 - 127 Undefined
Byte Format Description
0 Unsigned-8 Channel number (1/2)
1 Unsigned-8 Measurement type
2 Unsigned-8 Alarm value unit
3 - 6 Float Alarm value
7 Unsigned-8 Alarm type:
0: Low;
1: High;
2: Fault
8 Unsigned-8 Alarm state:
0: Normally;
1: Failsafe;
Byte Format Description
0 Unsigned-8 Channel number(1/2)
1 Unsigned-8 Measurement type
2 Unsigned-8 Alarm value unit
3 - 6 Float Alarm value
7 Unsigned-8 Alarm type:
0: Low;
1: High;
2: Fault
8 Unsigned-8 Alarm state:
0: Normally;
1: Failsafe;
Code Class Description