Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 77 / 174

AquaTrans™ AT600 User’s manual 67
Chapter 4. Initial setup and programming
4.7.6 Programming the transducer when wetted selected
4.7.6.1 Entering a standard transducer
The available AT600 standard transducers are listed in table 6 below.
Table 6: Standard wetted transducer types
Select transducer and press [√]. The following
screen opens.
Select STD and press [√]. A screen similar to
the following opens.
Press [√] again, and a screen similar to the
following opens.
Use the [

] or [

] key to select a specific digit
and change that digit as required. After all
digits are correct, press [√] to save. Then,
press [x] to return to the previous screen.
Transducer number Transducer type
40 WT-1/1P-10-00-NT
44 WT-1/1P-05-00-NT
71 PA-36-1P/WT-1/1P-10-00
72 PA-36-1P/WT-1/1P-10-00-HL
73 PA-PV-1P or F/WT-1/1P-10-EW
74 PA-36-1P-EW/WT-1/1P-10
75 PA-36-1P-EW/WT-1/1P-10-00-HL