Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 11 / 174

AquaTrans™ AT600 User’s manual 1
Chapter 1. General installation instructions
Chapter 1. General installation instructions
1.1 Introduction
Thank you for purchasing the AT600 ultrasonic flow meter. The AT600 is a clamp-on ultrasonic flow meter for the
measurement of liquid products. It is designed for the industrial applications, including water, wastewater, steel,
campus energy, and others. The AT600 utilizes a new electronics platform and industrial design to make it extremely
simple to install and use in the field.
• So easy to use, it practically installs itself
The AT600 consists of the new AT600 electronics, a metal enclosure, the field proven AT transducer system, and a
clamp-on transducer fixture (see figure 1 below).
Figure 1: Typical AT600 system mounted on a pipe
Fixture with
transducer
installed
Power cable
U-Bolt
Electronics
Transducer cable
Strap