Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 109 / 174

AquaTrans™ AT600 User’s manual 99
Chapter 6. Communication
Command 171 (0xAB): Set loop current percentage
This command is to set the output percentage of loop current.
Table 59: Request data bytes for set loop current percentage
Table 60: Response data bytes for set loop current percentage
Table 61: Command-specific response codes for set loop current percentage
5 Error Too few data bytes received
6 Error Device-specific command error
7 Error In write protect mode
8 Undefined
9 Error Incorrect loop current mode or value
10 - 15 Undefined
16 Error Access restricted
17 - 31 Undefined
32 Error Busy
33 - 127 Undefined
Byte Format Description
0 - 3 Float Loop current percentage, units of percent.
Byte Format Description
0 - 3 Float Loop current percentage, units of percent.
Code Class Description
0 Success No command-specific errors
1 - 2 Undefined
3 Error Passed parameter too large
4 Error Passed parameter too small
5 Error Too few data bytes received
6 Error Device-specific command error
7 Error In write protect mode
8 Undefined
9 Error Incorrect loop current mode or value
10 - 15 Undefined
16 Error Access restricted
17 - 31 Undefined
32 Error Busy
33 - 127 Undefined
Code Class Description