Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 75 / 174

AquaTrans™ AT600 User’s manual 65
Chapter 4. Initial setup and programming
In the special transducer menu, select
frequency and press [√]. The following screen
opens.
Select the appropriate option and press [√]
twice to return to the previous screen.
Select wedge angle and press [√]. The
following screen opens.
Press [√] again, and a screen similar to the
following opens.
Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that
digit as required. After all digits are correct,
press [√] to save. Then, press [x] to return to
the previous screen.
Select wedge SNSD and press [√]. The
following screen opens.
Press [√] again, and a screen similar to the
following opens.