Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 30 / 174

Chapter 3. Wiring the AT600 electronics
20 AquaTrans™ AT600 User’s manual
For proper wiring, the power lines, transducer cable and I/O lines must be routed through the appropriate cable
glands (see figure 24 below). Also, refer to "Wiring cable specifications and requirements" on page 144 for the required
cable specifications.
IMPORTANT: Any unused cable glands must be plugged with the cable gland inserts provided with meter.
Figure 24: Recommended cable gland usage
GLAND HOLE 5 GLAND HOLE 3
GLAND HOLE 1
GLAND HOLE 2
GLAND HOLE 4 DETAIL B
CABLE GLAND HOLES
Hole num. Feed-through cables
1 Power lines
2 Digital output B cable lines
Digital output C cable lines
Gate input cable lines
3 Service Modbus cable lines
Customer Modbus cable lines
4 Analog output A cable lines
5 Transducer cable lines