Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 72 / 174

Chapter 4. Initial setup and programming
62 AquaTrans™ AT600 User’s manual
Table 4: Pre-programmed pipe lining materials
Note: The units shown are the units selected in the units setting menu.
4.7.5 Programming the transducer when clamp-on selected
4.7.5.1 Entering a standard transducer
Name Lining material
Tar epoxy Tar epoxy
Pyrex glass Pyrex glass
Asbestos cement Asbestos cement
Mortar Mortar
Rubber Rubber
Teflon Teflon (PFTE)
Press [√] again, and a screen
similar to the following
opens.
Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that
digit as required. After all digits are correct,
press [√] to save. Then, press [x] to return to
the previous screen.
Select transducer and press [√].
The following screen opens.
Select STD and press [√]. A
screen similar to the following
opens.