Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 129 / 174

AquaTrans™ AT600 User’s manual 119
Chapter 6. Communication
Table 129: Response data bytes for write transducer information
Table 130: Command-specific response codes for write transducer information
Command 205 (0xCD): Write transducer traverses and spacing
This command is to write transducer traverses and spacing.
Table 131: Request data bytes for write transducer traverses and spacing
0 - 3 Unsigned-32 Transducer type:
0: Other;
4 - 7 Unsigned-32 Transducer frequency
8 - 11 Unsigned-32 Transducer wedge type
12 – 15 Unsigned-32 Transducer wedge angle
16 – 19 Unsigned-32 Transducer wedge SOS
20 - 23 Unsigned-32 Transducer Tw
Byte Format Description
0 - 3 Unsigned-32 Transducer type:
0: Other;
4 - 7 Unsigned-32 Transducer frequency
8 - 11 Unsigned-32 Transducer wedge type
12 – 15 Unsigned-32 Transducer wedge angle
16 – 19 Unsigned-32 Transducer wedge SOS
20 - 23 Unsigned-32 Transducer Tw
Code Class Description
0 Success No command-specific errors
1 - 4 Undefined
5 Error Too few data bytes received
6 Error Device-specific command error
7 Error In write protect mode
8 - 15 Undefined
16 Error Access restricted
17 - 127 Undefined
Byte Format Description
0 Unsigned-8 Transducer traverse
1 - 4 Float Transducer spacing