Baker Hughes Panametrics AquaTrans AT600, User Manual

Page: 113 / 174

AquaTrans™ AT600 User’s manual 103
Chapter 6. Communication
Table 73: Command-specific response codes for read pulse configuration
Command 178 (0xB2): Read frequency configuration
This command is to read the frequency configuration.
Table 74: Request data bytes for read frequency configuration
Table 75: Response data bytes for read frequency configuration
Table 76: Command-specific response codes for read frequency configuration
Code Class Description
0 Success No command-specific errors
1 Undefined
2 Error Invalid selection
3 - 4 Undefined
5 Error Too few data bytes received
6 Error Device-specific command error
7 - 127 Undefined
Byte Format Description
0 Unsigned-8 Channel number (1/2)
Byte Format Description
0 Unsigned-8 Channel number
1 Unsigned-8 Measurement type
2 Unsigned-8 Frequency value unit
3 - 6 Float Frequency base value
7 - 10 Float Frequency full value
11 - 14 Unsigned-32 Full frequency, unit is Hz
15 Unsigned-8 Frequency error handling:
0: Low;
1: High;
2: Hold;
3: Value
16 - 19 Unsigned-32 Error handling value, unit is Hz
Code Class Description
0 Success No command-specific errors
1 Undefined
2 Error Invalid selection
3 - 4 Undefined
5 Error Too few data bytes received
6 Error Device-specific command error
7 - 127 Undefined