AWS Storage Gateway User Manual Download Page 292

Page: 292 / 438

AWS Storage Gateway User Guide

Performance Guidance for File Gateways

Performance

In this section, you can ﬁnd information about AWS Storage Gateway performance.

Topics

•

Performance Guidance for File Gateways (p. 285)

•

Performance Guidance for Tape Gateways (p. 286)

•

Optimizing Gateway Performance (p. 287)

Performance Guidance for File Gateways

In this section, you can ﬁnd conﬁguration guidance for provisioning hardware for your ﬁle gateway VM.

The Amazon EC2 instance sizes and types that are listed in the table are examples, and are provided for

reference.

Cache Disk Conﬁguration

For best performance, the cache disk size must be tuned to the size of the active working set. Using

multiple local disks for the cache increases write performance by parallelizing access to data and leads to

higher IOPS.

Following are recommended conﬁgurations for your ﬁle gateway.

Recommended Conﬁguration

Write Throughput (File

Sizes > 6 MB)

Root disk: 80 GB io1, 4,000 IOPS

Cache disk: 512 GiB EBS cache, io1, 1,500

provisioned IOPS

Minimum network performance: 1 Gbps

Amazon EC2 instance: c5.4xlarge

125 MiB/s (0.9 Gbps)

Storage Gateway Hardware Appliance

Minimum network performance: 5 Gbps

300 MiB/s (2.3 Gbps)

Root disk: 80 GB io1, 4,000 IOPS

Cache disk: Two 1.9 TiB NVME caches

(ephemeral)

Minimum network performance: 5 Gbps

Amazon EC2 instance: i3.4xlarge (

the section

called “Using Ephemeral Storage With EC2

Gateways” (p. 223)

)

500 MiB/s (3.9 Gbps)

API Version 2013-06-30

285

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands