AWS Storage Gateway User Manual Download Page 248

Page: 248 / 438

AWS Storage Gateway User Guide

Performing Tasks on the VM Local Console (File Gateway)

Conﬁguring Your Gateway to Use the VMXNET3 Network Adapter

AWS Storage Gateway supports the E1000 network adapter type in both VMware ESXi and Microsoft

Hyper-V Hypervisor hosts. However, the VMXNET3 (10 GbE) network adapter type is supported

in VMware ESXi hypervisor only. If your gateway is hosted on a VMware ESXi hypervisor, you can

reconﬁgure your gateway to use the VMXNET3 (10 GbE) adapter enter. For more information on this

adapter, see the

VMware website

Important

To select VMXNET3, your guest operating system enter must be

Other Linux64

Following are the steps you take to conﬁgure your gateway to use the VMXNET3 adapter:

1. Remove the default E1000 adapter.
2. Add the VMXNET3 adapter.
3. Restart your gateway.
4. Conﬁgure the adapter for the network.

Details on how to perform each step follow.

To remove the default E1000 adapter and conﬁgure your gateway to use the VMXNET3

adapter

1. In VMware, open the context (right-click) menu for your gateway and choose

Edit Settings

2. In the

Virtual Machine Properties

window, choose the

Hardware

tab.

3. For

Hardware

, choose

Network adapter

. Notice that the current adapter is E1000 in the

Adapter

Enter

section. You replace this adapter with the VMXNET3 adapter.

4. Choose the E1000 network adapter, and then choose

Remove

. In this example, the E1000 network

adapter is

Network adapter 1

Note

Although you can run the E1000 and VMXNET3 network adapters in your gateway at the

same time, we don't recommend doing so because it can cause network problems.

5. Choose

Add

to open the Add Hardware wizard.

6. Choose

Ethernet Adapter

, and then choose

Next

7. In the Network Enter wizard, select

VMXNET3

for

Adapter Enter

, and then choose

Next

8. In the Virtual Machine properties wizard, verify in the

Adapter Enter

section that

Current Adapter

set to

VMXNET3

, and then choose

9. In the VMware VSphere client, shut down your gateway.
10. In the VMware VSphere client, restart your gateway.

API Version 2013-06-30

241

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands