AWS Storage Gateway User Manual Download

Page: 238 / 438

AWS Storage Gateway User Guide

Performing Tasks on the VM Local Console (File Gateway)

Note

The only proxy conﬁguration that ﬁle gateways support is HTTP.

If your gateway must use a proxy server to communicate to the internet, then you need to conﬁgure the

HTTP proxy settings for your gateway. You do this by specifying an IP address and port number for the

host running your proxy. After you do so, AWS Storage Gateway routes all HTTP traﬃc through your

proxy server. For information about network requirements for your gateway, see

Network and Firewall

Requirements (p. 12)

To conﬁgure an HTTP proxy for a ﬁle gateway

1. Log in to your gateway's local console:

• For more information on logging in to the VMware ESXi local console, see

Accessing the Gateway

Local Console with VMware ESXi (p. 273)

• For more information on logging in to the Microsoft Hyper-V local console, see

Access the

Gateway Local Console with Microsoft Hyper-V (p. 274)

2. On the

AWS Appliance Activation - Conﬁguration

main menu, enter

to begin conﬁguring the

HTTP proxy.

3. On the

HTTP Proxy Conﬁguration menu

, enter

and provide the host name for the HTTP proxy

server.

You can conﬁgure other HTTP settings from this menu as shown following.

API Version 2013-06-30

231

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands