AWS Storage Gateway User Manual Download

Page: 77 / 438

AWS Storage Gateway User Guide

Using Your Volume

• To optimize your gateway, see

Optimizing Gateway Performance (p. 287)

• To learn about Storage Gateway metrics and how you can monitor how your gateway performs, see

Monitoring Your Gateway and Resources (p. 185)

• To learn more about conﬁguring your gateway's iSCSI targets to store data, see

Connecting to Your

Volumes to a Windows Client (p. 365)

To learn about sizing your volume gateway's storage for real-world workloads and cleaning up resources

you don't need, see the following sections.

Sizing Your Volume Gateway's Storage for Real-World Workloads

By this point, you have a simple, working gateway. However, the assumptions used to create this gateway

are not appropriate for real-world workloads. If you want to use this gateway for real-world workloads,

you need to do two things:

1. Size your upload buﬀer appropriately.
2. Set up monitoring for your upload buﬀer, if you haven't done so already.

Following, you can ﬁnd how to do both of these tasks. If you activated a gateway for cached volumes,

you also need to size your cache storage for real-world workloads.

To size your upload buﬀer and cache storage for a gateway-cached setup

•

Use the formula shown in

Determining the Size of Upload Buﬀer to Allocate (p. 221)

for sizing the

upload buﬀer. We strongly recommend that you allocate at least 150 GiB for the upload buﬀer. If

the upload buﬀer formula yields a value less than 150 GiB, use 150 GiB as your allocated upload

buﬀer.

The upload buﬀer formula takes into account the diﬀerence between throughput from your

application to your gateway and throughput from your gateway to AWS, multiplied by how long you

expect to write data. For example, assume that your applications write text data to your gateway at

a rate of 40 MB per second for 12 hours a day and your network throughput is 12 MB per second.

Assuming a compression factor of 2:1 for the text data, the formula speciﬁes that you need to

allocate approximately 675 GiB of upload buﬀer space.

To size your upload buﬀer for a stored setup

•

Use the formula discussed in

Determining the Size of Upload Buﬀer to Allocate (p. 221)

. We

strongly recommend that you allocate at least 150 GiB for your upload buﬀer. If the upload buﬀer

formula yields a value less than 150 GiB, use 150 GiB as your allocated upload buﬀer.

The upload buﬀer formula takes into account the diﬀerence between throughput from your

application to your gateway and throughput from your gateway to AWS, multiplied by how long you

expect to write data. For example, assume that your applications write text data to your gateway at

a rate of 40 MB per second for 12 hours a day and your network throughput is 12 MB per second.

Assuming a compression factor of 2:1 for the text data, the formula speciﬁes that you need to

allocate approximately 675 GiB of upload buﬀer space.

To monitor your upload buﬀer

1. Open the AWS Storage Gateway console at

https://console.amazonaws.cn/storagegateway/home

2. Choose the

Gateway

tab, choose the

Details

tab, and then ﬁnd the

Upload Buﬀer Used

ﬁeld to view

your gateway's current upload buﬀer.

3. Set one or more alarms to notify you about upload buﬀer use.

API Version 2013-06-30

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands