AWS Storage Gateway User Manual Download Page 239

Page: 239 / 438

AWS Storage Gateway User Guide

Performing Tasks on the VM Local Console (File Gateway)

Do This

Conﬁgure an HTTP proxy

Enter

You need to supply a host name and port to

complete conﬁguration.

View the current HTTP proxy conﬁguration

Enter

If an HTTP proxy is not conﬁgured, the message

HTTP Proxy not configured

is displayed. If

an HTTP proxy is conﬁgured, the host name and

port of the proxy are displayed.

Remove an HTTP proxy conﬁguration

Enter

The message

HTTP Proxy Configuration

Removed

is displayed.

4. Restart your VM to apply your HTTP conﬁguration settings.

Conﬁguring Your Gateway Network Settings

The default network conﬁguration for the gateway is Dynamic Host Conﬁguration Protocol (DHCP). With

DHCP, your gateway is automatically assigned an IP address. In some cases, you might need to manually

assign your gateway's IP as a static IP address, as described following.

To conﬁgure your gateway to use static IP addresses

1. Log in to your gateway's local console:

• For more information on logging in to the VMware ESXi local console, see

Accessing the Gateway

Local Console with VMware ESXi (p. 273)

• For more information on logging in to the Microsoft Hyper-V local console, see

Access the

Gateway Local Console with Microsoft Hyper-V (p. 274)

2. On the

AWS Appliance Activation - Conﬁguration

main menu, enter

to begin conﬁguring your

network.

API Version 2013-06-30

232

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands