AWS Storage Gateway User Manual Download Page 81

Page: 81 / 438

AWS Storage Gateway User Guide

Backing Up Your Volumes

On the AWS Backup console, you can create a backup plan, assign a Storage Gateway volume to the

backup plan, and create a backup. You can also do ongoing backup management tasks.

Finding and Restoring Your Volumes from AWS Backup

You can ﬁnd and restore your backup Storage Gateway volumes from the AWS Backup console. For more

information, see the

AWS Backup User Guide

. For more information, see

Recovery Points

in the

AWS

Backup User Guide

To ﬁnd and restore your volumes

1. Open the AWS Backup console and ﬁnd the Storage Gateway volume backup that you want to

restore. You can restore the Storage Gateway volume backup to an Amazon EBS volume or to a

Storage Gateway volume. Choose the appropriate option for your restore requirements.

2. For

Restore type

, choose to restore a stored or cached Storage Gateway volume and provide the

required information:

• For a stored volume, provide the information for

Gateway name

Disk ID

, and

iSCSI target name

API Version 2013-06-30

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands