AWS Storage Gateway User Manual Download

Page: 95 / 438

AWS Storage Gateway User Guide

Using Your Tape Gateway

3. Open the context (right-click) menu for each new tape and choose

Inventory

4. Open the context (right-click) menu for each new tape and choose

Format

Each tape's barcode now appears in your Storage Gateway console, and each tape is ready to use.

Backing Up Data to a Tape

When your tapes have been loaded into Arcserve, you can back up data. The backup process is the same

as backing up physical tapes.

To back up data to a tape

1. From the

Quick Start

menu, open the restore a backup session.

2. Choose the

Source

tab, and then choose the ﬁle system or database system that you want to back

up.

3. Choose the

Schedule

tab and choose the repeat method you want to use.

4. Choose the

Destination

tab and then choose the tape you want to use. If the data you are backing

up is larger than the tape can hold, Arcserve prompts you to mount a new tape.

5. Choose

Submit

to back up your data.

Archiving a Tape

When you archive a tape, your tape gateway moves the tape from the tape library to the oﬄine storage.

Before you eject and archive a tape, you might want to check the content on it.

To archive a tape

1. From the

Quick Start

menu, open the restore a backup session.

2. Choose the

Source

tab, and then choose the ﬁle system or database system you want to back up.

3. Choose the

Schedule

tab and choose the repeat method you want to use.

4. Choose your gateway, open the context (right-click) menu for one tape, and then choose

Import/

Export Slot

5. Assign a mail slot to load the tape. The status in the Storage Gateway console changes to

Archive

The archive process might take some time.

The archiving process can take some time to complete. The initial status of the tape appears as

IN TRANSIT TO VTS

. When archiving starts, the status changes to

ARCHIVING

. When archiving is

completed, the tape is no longer listed in the VTL but is archived in S3 Glacier or S3 Glacier Deep Archive.

Restoring Data from a Tape

Restoring your archived data is a two-step process.

To restore data from an archived tape

1. Retrieve the archived tape to a tape gateway. For instructions, see

Retrieving Archived

Tapes (p. 181)

2. Use Arcserve to restore the data. This process is the same as restoring data from physical tapes. For

instructions, see the

Arcserve Backup r17 documentation

To restore data from a tape, use the following procedure.

To restore data from a tape

1. From the

Quick Start

menu, open the restore a restore session.

API Version 2013-06-30

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands