AWS Storage Gateway User Manual Download Page 130

Page: 130 / 438

AWS Storage Gateway User Guide

Using Your Tape Gateway

2. Choose

Conﬁgure Storage Devices

to open the Device Conﬁguration wizard.

3. Choose

Next

. The NetBackup application detects your computer as a device host.

4. In the

Device Hosts

column, select your computer, and then choose

Next

. The NetBackup

application scans your computer for devices and discovers all devices.

5. In the

Scanning Hosts

page, choose

Next

, and then choose

Next

. The NetBackup application ﬁnds

all 10 tape drives and the medium changer on your computer.

6. In the

Backup Devices

window, choose

Next

7. In the

Drag and Drop Conﬁguration

window, verify that your medium changer is selected, and then

choose

Next.

8. In the dialog box that appears, choose

Yes

to save the conﬁguration on your computer. The

NetBackup application updates the device conﬁguration.

9. When the update is completed, choose

Next

to make the devices available to the NetBackup

application.

10. In the

Finished!

window, choose

Finish

To verify your devices in the NetBackup application

1. In the NetBackup Administration Console, expand the

Media and Device Management

node, and

then expand the

Devices

node. Choose

Drives

to display all the tape drives.

API Version 2013-06-30

123

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands